To reap the benefits offered by a Netgear WiFi router, it is necessary that it obtains an IP address from the modem. Although a Netgear router operates on the address, it gets a different IP from the modem that lets it communicate with other devices in the network system. Just in case there is an IP address problem with your Netgear router, it is necessary that you pay attention as it can put a full stop to your internet usage experience. With the help of this post, we will help you learn about a few techniques along with the reasons causing this problem. Stick to reading.

Netgear Router Not Getting IP from Modem [Reasons]

The very obvious reason why a Netgear router fails to get an IP from the modem is a weak connection between both devices. Now the question is that what might have weakened this connection? Well, the answer is the source holding both devices together. For your information, it is an Ethernet cable that is holding both devices.

You are suggested to run an eye scan over the same and identify if it is damage-free or not. Just in case it is found damaged, you should get it replaced with a new one. The reason being, a damaged Ethernet cable will only create connectivity issues. Apart from this, we also recommend you examine the strength of the connection. It is supposed to be finger-tight. Loose connection can also make it difficult for the Netgear router to get an IP address from the modem.

And you know what’s more regarding this connection? There are chances that you have connected your devices using incorrect ports. Therefore, you should check if you have connected the Ethernet cable to the LAN port of your modem and the WAN port of your Netgear router or not? If the connections have not been made this way, you should make them correct. If everything seems to be perfect with the LAN cable connection, you must make your way to the hacks that have been mentioned below. Perhaps, this will rid you of the issue.

Solutions: Netgear Router Not Getting IP from the Modem

  1. Restart the Netgear Router

This is to inform you that whenever the router does not boot up properly, it fails to receive an IP address from the modem. Therefore, what we suggest you do is restart your Netgear router. It will provide it with a chance to boot up properly. So, without waiting for a minute, you are suggested to power down the router and unplug it from its respective outlet. After that, you must wait for 20-30 minutes and connect your router back to its respective outlet. Power up the router and see if gains the internet access back or not. Just in case it doesn’t you must give a shot at the next technique.

Note: You need to make sure that your Netgear router is getting a stable power supply. It will be feasible only if you connect your Netgear device to a working wall outlet.

  • Keep the Router in an Interference-free Zone

Have a look at the surrounding of your Netgear router. Have you placed it near the devices emitted electromagnetic frequencies or the objects containing a large amount of water? If you have answered yes, you must relocate your Netgear router. Ensure that your router is placed in an interference-free zone. Once done, try to access the routerlogin page on a device connected to the Netgear router network. If you get successful then it means the issue is resolved.

The Final Words

We are now wrapping up the post explaining what to do if your Netgear router fails to obtain the IP from the modem. Let’s anticipate that you will be able to get positive outcomes with the help of aforementioned tips. Thanks for reading the post.